Pre-Installation & Facility Requirements Guide
Pre-Installation & Facility Requirements Guide
Ensure smooth delivery, seamless room placement, and compliant electrical operation for SenOxy luxury hyperbaric chambers, whole-body cryotherapy systems, and smart contrast therapy suites.
1. Doorway & Architectural Pathway Clearance
All SenOxy large-format equipment is engineered with modular sectional architecture to allow passage through standard residential and clinical entryways before final in-room assembly.
| Equipment Series | Minimum Doorway Width | Hallway / Corner Turn | Stairway / Elevator Requirement |
|---|---|---|---|
| 2.0 ATA Single Hard Shell HBOT | 30 inches (76 cm) | Standard 90° turn with 36" clearance | Standard service elevator (min. 78" depth) |
| 2-Person & Multi-Person HBOT | 32 inches (81 cm) | Requires straight or wide corridor entry | Ground floor or freight elevator recommended |
| PRO Whole Body Cryotherapy | 34 inches (86 cm) | Standard 90° commercial door swing | Commercial freight elevator or ground level |
| Smart Cold Plunge & Red Light Bed | 30 inches (76 cm) | Standard residential hallway | Standard residential staircases with 2 movers |
2. Electrical, Power & Circuit Specifications
🔌 Voltage & Dedicated Outlets
We build each unit to your regional voltage specification prior to dispatch: 110V–120V / 60Hz (North America) or 220V–240V / 50Hz (Europe, UK, Australia, Asia). We recommend a dedicated 15A or 20A circuit breaker without sharing heavy appliances.
⚡ Grounding & GFCI Safety
Cold plunge chillers and hydrotherapy equipment require a GFCI (Ground Fault Circuit Interrupter) protected outlet. All SenOxy hard-shell chambers come with built-in internal surge suppression and earth-grounding terminals.
🌡️ Ambient Room Climate & Ventilation
Optimal room temperature is 18°C–24°C (64°F–75°F) with standard active air conditioning. Provide at least 12 inches (30 cm) clearance around compressor and chiller intake vents for continuous heat exhaust dissipation.
3. Flooring, Structural Load & Placement
Review static weight guidelines prior to in-room placement:
- Single-Person Hard-Shell Chamber: Net weight approximately 160–220 kg (350–485 lbs). Fully compliant with standard residential concrete or wood subfloors. We recommend placing on a commercial-grade high-density rubber protective mat.
- Multi-Person Chamber Suite: Net weight 350–650 kg (770–1,430 lbs). Recommended for ground-level concrete slab or reinforced commercial building flooring.
- Smart Cold Plunge Tub: Dry weight ~70 kg; filled water operating weight ~420–550 kg (925–1,210 lbs). Must be positioned on a level, water-resistant floor surface with direct drainage access nearby.
Complimentary Architectural & CAD Review
Unsure whether your doorway, stairwell, or electrical panel meets specifications? Send your room dimensions, floor plan drawings, or photos to our senior engineering concierge team.
Direct Engineering Inquiries: support@senoxylife.com